|
|
|
Sennheiser HSL-10 Handset Lifter for BW900 |
| |
| |
| The Sennheiser HSL10 is a mechanical phone handset lifter that lets you automatically pick up or hang up the telephone handset, even if you are not at your desk (within the entire range of your system's base station. ). |
| |
| Product Name: |
Sennheiser HSL-10 Handset Lifter for BW900 |
| Product Code: |
500712 |
| Brand: |
Sennheiser Communications |
| |
|
 |
| |
| RRP |
AUD $139.95 |
| You Save |
AUD $20.95 |
| Our Price |
AUD $119.00 |
|
| |
|
|
| |
Sennheiser HSL 10 Handset
Lifter
|
| |
The new mechanical handset lifter HSL 10 by headset specialists Sennheiser Communications
enables wireless headset system wearers (e.g. BW900 / DW800) to take and
end calls conveniently, even when not sitting at their desk.
Those who have already converted to a headset surely appreciate the relief
on their spine from no longer having to wedge their phone between shoulder
and neck. You unquestionably enjoy the convenience of having your hands
free to grab files or type into the computer. You have made the headset
even more useful by going wireless, combining your regular wired headset
with a Sennheiser BW900 or DW 800 wireless system. This allows you to roam
around the office to grab a fax, a print out or even a coffee, without interrupting
an important phone conversation.
So what about when the phone rings while you are away from your desk? Maybe you can't even hear it and you miss the call entirely. If you are within hearing range but don't have an
electronic answering machine built into your phone, you will have to rush back to your desk and be embarrassingly short of breath. And if the conversation ends
while you are roaming around, the seemingly endless beeping of the disconnected line is enough to drive you crazy until you can get back to your phone to hang up.
But do not despair! With a clever little device, Sennheiser Communications now offers the solution.
The mechanical handset lifter, HSL 10, lets you automatically pick up or hang up the telephone handset, even if you are not at your desk. The HSL 10 is connected to a compatible base station (eg: the BW900 base station),
which is in touch with your wireless headset or system. By answering or ending the call on your wireless system, you send a command to the HSL 10 to physically raise or lower the telephone handset.
Of course, it works within the entire range of your system's base station.
What's more, the handset lifter can be trained to recognize the sound of your phone ringing, so that even if you are not close enough to hear it, the HSL 10 will. The intelligent gadget
then passes the ring signal to your wireless system to inform you of the incoming call. Now that's convenient.
You can teach two different ring tones to your HSL 10. This is required if
your telephone supports two different ring tones, e.g. for external and internal calls,
you hear a ring tone in your headset although not your telephone, but another telephone in the vicinity is ringing,
you can not hear a ring tone through your headset even your telephone is ringing.
HSL-10 with phone handset down:
HSL-10 lifting the phone handset:
|
| |
Sennheiser HSL 10 Handset
Lifter
|
| |
| |
|
|
|
|
| |
|
|
|
|
|
|
|
Delivery includes
1 HSL 10 handset lifter
1 microphone with cable and 2.5 mm mono jack plug
1 cable with two RJ 11 connectors
1 instruction manual
1 double-sided adhesive tape for the microphone
1 lateral extension
1 extension block
Specifications:
Overall unit:
Dimensions 77 × 110 × 42 cm
Weight 80 g
Temperature range -5 to +40 °C
Power source 6 V DC via base station
Max. lifting height >25 mm
Max. load 200 g
Microphone
Length of cable 40 cm
Sensitivity 94 dB SPL -43 dBV
|
| |
|
|
|
|
|
| |
|
|
|
|
