A 1-in 2-out MIDI data router/filter Messages can also be rechannelized to any other MIDI channel The Router will accept a total of 10 settings Settings are retained even when switched off & can be reprogrammed as often as needed
Breath to MIDI converter for use with the Yamaha BC3A Breath Controller Can be reprogrammed with new settings as often as needed Generates continuous MIDI data corresponding to the amount of breath pressure applied
8x 1/4" phone jack inputs for connection to footswitches or contact closures Triggered event types are programmable Settings are retained when turned off and can be reprogrammed with new settings as often as needed.
The Midi Solutions Footswitch Multi Midi Event Generator creates MIDI events from a connected footswitch and merges them with any incoming Midi messages.
All MIDI messages appearing at any of the eight inputs are merged to the 1 output A fast merging algorithm ensures that MIDI data is processed with minimal delay Requires no batteries or power supply to operate
All MIDI messages appearing at the two inputs are merged to the output A fast merging algorithm ensures that the MIDI data is processed with minimal delay.
The Relay can be programmed to open or close in response to MIDI events. Settings are retained even after power is removed. The RELAY can be reprogrammed with new settings as often as needed.
Midi Velocity Convertor applies selected velocity curves to incoming MIDI notes Can be selected from 40 preset curves or a user defined curve Can be reprogrammed with new settings as often as needed
Accepts an expression pedal as an input and generates continuous MIDI data based on its position May be inserted inline at any point in the MIDI data stream Accurately tracks the position of the pedal
Need to transmit a Midi Signal over a long distance? or even power up to 20 passive MIDI devices from the 1 unit. The Power Adpater from MIDI Solutions is the solution. Comes complete with 9V wall adapter.
4-in 1-out MIDI Merge Box All MIDI messages appearing at the four inputs are merged to the 1 output A fast merging algorithm ensures that the MIDI data is processed with minimal delay
1-in 4-out MIDI Thru Box MIDI messages appearing at the input are sent to all four Thru outputs Active circuitry cleans up any skewing of MIDI data Requires no batteries or power supply to operate
The R8 contains 8 relays which can be programmed to open or close in response to MIDI events. Programmed settings are retained even after power is turned off. The unit can be reprogrammed with new settings when needed.
MIDI Solutions Realtime Midi Mapper. Convert MIDI messages from one type to another in real time. e.g: map MIDI Channel Pressure to MIDI Volume Message.
1-in 8-out MIDI Thru Box Active circuitry cleans up any skewing of MIDI data Requires no batteries or power supply to operate MIDI Solutions Thru boxes can also be used to extend a MIDI connection further than the standard 50 feet
All MIDI messages appearing at the input are sent to both outputs Active circuitry cleans up any skewing of MIDI data, minimising loss of quality at any point in the signal chain Requires no batteries or power supply
